top of page

Terminators / Dummy Loads - MIL-STD-1553

Features

  • Mate with DBP couplers

  • Resistors - Military 1% Class "S"

  • Rugged Construction

​

Options

  • Without chain

  • Resistors - Alternate Values

  • 2 and 4 Lug Bayonet styles

Terminator Miniature PL75 Type 3 Lug Bayonet Plug with 6" Metal Bead Chain

Terminator Miniature PL75 Type 3 Lug Bayonet Plug with 6" Metal Bead Chain RT500078 RT500078NC RT500075 RT501500 RT501000 RT502000 RT503000

Terminator Inline with 12" Lead

Terminator Inline with 12" Lead RTL500078

Terminator Miniature PL375 Type Threaded Plug with 6" Metal Bead Chain

Terminator Miniature PL375 Type Threaded Plug with 6" Metal Bead Chain RT600078 RT600078NC RT600075 RT60100 RT601500 RT602000 RT60300

Terminator Subminiature PL155 Type 3 Lug Bayonet Plug with 6" Metal Bead Chain

Terminator Subminiature PL155 Type 3 Lug Bayonet Plug with 6" Metal Bead Chain RF700078 RF700078NC RF700075 RF701000 RF701500 RF702000 RF703000

Terminator Threaded Subminiature PL3153 with 6" Metal Bead Chain

Terminator Threaded Subminiature PL3153 with 6" Metal Bead Chain RF800078 RF800078NC RF800075 RF801000 RF801500 RF802000 RF803000

Back to top

Terminators are required to terminate or "close" both ends of the bus typically with a 78 OHM device. Stub loading terminators or "dummy loads" as they are called, may be used on a couplers open stub ports. This simulates the bus loading demands that additional UUT's placed on the databus would create.

bottom of page